Terminal - Version: Alpha 0.2.2
(26 Aug 2009)
Terminal is a mojo applicaton for the Pre which runs a full VT-100 or Linux terminal in a mojo scene. Terminal relies on a custom written plugin developed from community research which allows the mojo app to talk to the back end. It can be used for local operation to run your Pre, or can reach out from the Pre to other computers.
This is alpha software. Consider yourself lucky if it works at all. Many people have put many hours of hard work in to get just this far - respect that effort when making comments and suggestions.
Install Preware, WebOS Internal's over the air installer, and simply choose and install Terminal from the available applications.
Please be aware that org.webosinternals.terminal and org.webosinternals.termplugin are licensed under the GPLv2.
They cannot be used by a closed source application. If you want to use them in a non-GPLv2 but otherwise open source application, please contact the authors.
||Gesture area - .
||Gesture area - 0
||Gesture area - 1
||Gesture area - 2
||Gesture area - 3
||Gesture area - 4
||Gesture area - 6
||Gesture area - 7
||Gesture area - 8
||Gesture area - 9
||Orange-Period ("." key)
- (Sym is Control and Control I is the standard tab code)
Rotating the pre will take the terminal to landscape mode. The keyboard will not rotate with you. Attempting to physically force the keyboard to rotate to the proper orientation for landscape mode is known to bork a Pre. :)
Support for both "linux" and "vt100" term types should now be supported, so an export TERM line should no longer be needed. If you find your screen filling with gibberish that looks like ANSI codes, however, make sure you're using 0.1.4 or later version, and report here or in the IRC channel what you were running in the terminal that caused the issue.
If you do see odd behavior, you can force the more compatible vt100 terminal type by typing:
(followed by enter) Note that the case of that command is important.
- Prompt for login to enhance security / protect against rogue applications embedding termplugin (more convenient and equally secure method being developed for future release)
- Arrow keys, hold a finger on the gesture area so that the white LED lights up, and use the numbers area as if it were a direction pad (ie 2, 4, 6, 8, correspond to up, left, right, down, respectively)
- Several performance enhancements
- Screen scrolls automagically (no more flicking to keep up)
- Comma / underscore key bugs fixed
- Preferences are now saved
- The command 'reset' does not work; running it actually messed up the state of the terminal (ex. backspace no longer works).
- Some ansiFlags are not being used (ex. blink, italics etc. don't have any visual effect)
- The keybindings need to be redefinable.
Remember, this is early alpha software. You're lucky it works at all.
- Doesn't display a return in nano properly unless the screen is rotated
- No action after running exit in session should restart and ask for a new login
Some limitations: Many keys are not implemented. We're working on it, maybe even as you read this. :)
Y and U: Y and U in the emulator return the same raw keycode due to a bug in the emulator. However we're obtaining the key values a better way now so terminal should no longer be susceptible to this flaw.
Terminal can be found in the git.webos-internals.org source code repositories.
For commit permission to the project, contact destinal on #webos-internals or email [email@example.com]
Command Line Installation
Don't use the command line to install Terminal. Install Preware first (by using the command line if you must), and then use Preware to install Terminal.