Difference between revisions of "WebOS Hash Codes"

From WebOS Internals
Jump to: navigation, search
(Please exercise EXTREME caution when using the following codes...if you do something incorrectly, your phone will NO LONGER WORK, and you will have to contact Sprint technical support.:)
Line 67: Line 67:
 
'''##(MSL)# (Whatever your phone's MSL is)'''
 
'''##(MSL)# (Whatever your phone's MSL is)'''
 
This allows you to see/change your number. Do NOT change this to a number without notifying Sprint, or your phone will no longer work.
 
This allows you to see/change your number. Do NOT change this to a number without notifying Sprint, or your phone will no longer work.
 
==Additional Codes, SD==
 
  
 
'''##USBPASS# (8727277)''' USB pass through Control, easier to switch into diag mode.
 
'''##USBPASS# (8727277)''' USB pass through Control, easier to switch into diag mode.
  
 
'''##OMADM# (66236)''' Open Mobile Alliance Device Management provisioning.
 
'''##OMADM# (66236)''' Open Mobile Alliance Device Management provisioning.
 +
 +
 +
==Additional Codes (Unknown Functionality)==
  
 
'''##66338#''' ondevlog
 
'''##66338#''' ondevlog

Revision as of 23:21, 4 January 2010

Hash codes (so called because they are prefixed and suffixed with two "#" 'hash' characters) are entered into the phone dialer to invoke information displays and behaviors on the phone which can not be reached through menu choices.

As of webOS 1.3.5 the hash codes can be found in the following file on the phone: /usr/palm/applications/com.palm.app.phone/app/models/DialStringParser.js

CONFIRMED:

##8327633696# This enables/disables the Sticky Dialer feature. The sticky dialer feature, when enabled, allows the phone app to run in the background. It is enabled by default. When it is disabled, the phone application closes when it is not the "focused" card. This means that if you open the phone app, then go to browse the net, the phone app closes.

##TTY# (889) Enables/disables TTY.

##GPS# (477) This will give you location, altitude, speed, and accuracy information gathered via GPS.

##RTN# (786) This the Phone Information page. It tells you how many minutes the unit has on it, how much data has transpired, the warranty date, ESN, phone number, software and hardware revisions, refurbished status, etc.

##DEBUG# (33284) CDMA phone info screen, which contains a bunch of technical data on your curent signal and tower connection. Signal strength is given as RSSI, which stands for Received Signal Strength Indicator. The closer to zero the RSSI value, the better the signal.

##EVDO# (3836) Launches EVDO Settings. It gives you the options to force your pre into the following options: 1xRTT only, EVDO Rev 0 only, Hybrid Rev 0, EVDO only, or Hybrid Rev A (meaning pick the best available). Hybrid Rev A is likely to get you the best speed, but if you don't have good reception in your area, you may want to choose something else to conserve battery life.

##DATA# (3282) This stores all of your Sprint Data login information, including default gateway, etc. I don't recommend changing these settings unless your data services are not working.

##HELPHELP# (43574357) This opens Device Information.

##RADIO# (72346) This displays your telephony radio firmware version.

##VPON# (8766) Voice privacy enabled.

##VPOFF# (87633) Voice privacy disabled.

##8011183# Collect Logs (based on QWERTY: c011ect).

##5647# Collect Logs.

##7436581# Toggle Number Masking (SID6581: i adore my 64)

##TEST# (8378) Opens Diagnostic Tests Menu. Option for Manual Tests and Automatic Tests.


Please exercise EXTREME caution when using the following codes...if you do something incorrectly, your phone will NO LONGER WORK, and you will have to contact Sprint technical support:

##AKEY# (2539) Allows you to re-enter the 26-digit AKey on CDMA devices. Note: An incorrect AKey will deactivate the phone and you will need to contact technical support for the AKey.

##PREV# (7738) Opens Mobile Protocol Revision menu.

##OFF# (633) Turns off the radio.

##DEMO# (3366) This allows you to put your phone into 'Demo' mode. WARNING: Enabling the Palm demo will erase all of your personal settings and enable an instructional demo.

##(MSL)# (Whatever your phone's MSL is) This allows you to see/change your number. Do NOT change this to a number without notifying Sprint, or your phone will no longer work.

##USBPASS# (8727277) USB pass through Control, easier to switch into diag mode.

##OMADM# (66236) Open Mobile Alliance Device Management provisioning.


Additional Codes (Unknown Functionality)

##66338# ondevlog

##FTP# (387) ftp

##6346843277# CDTEST- Toggle Experimental Mode.

##2355273667# PPTEST- Toggle Experimental Mode.

Research credit to users LarrySteeze and MarkhamDev