Difference between revisions of "Application:HomeControl"
|Line 15:||Line 15:|
<br /><br /><br /><br />
<br /><br /><br /><br />
== Features ==
Revision as of 02:08, 20 December 2011
Home Control is an app that aims to provide means to control everything remotely controlled at your home. The current version is designed phones in mind (it will work nicely even with the small screen of Veer), but future versions will bring lot of changes for the UI when run in TouchPad. I haven't done much testing on TouchPad yet so if something is not working please let me know and I shall fix it.
The following general features do not require the server application. Use the IP/port info of the device (or computer where the app is running).
Boxee and XBMC control
Enables control of Boxee and XBMC (both devices and application running on a desktop machine).
Cisco IP surveillance (will be enabled soon)
Allows viewing of the cameras video feed in Home Control.
VLC video player control
Allows basic controlling of VLC video player, more advanced controls are coming. Requires the LUA interface to be enabled in the VLC.
TouchPad Surveillance Camera (will be enabled soon)
Enables using of the web cam in TouchPad as an security cam when placed on touchstone. You can also view the latest captured image on Home Control running on your phone (this needs the server application though).
Mouse and keyboard control
PulseAudio Mixer / Sound control
Banshee, Rhythmbox and MPD music player control
Totem video player control
Mouse and keyboard control
Front Row controlling
iTunes music player
QuickTime video player
System Sound Mixer / Volume
There are some advanced features that are not so obvious, specifically when using the app on devices with small screens (e.g. Veer). Devices with larger screens may display these features all the time.
You can view the progress bar by tapping the currently playing song/video info (song/video needs to be playing or paused). The bar shows up for 5 seconds unless you start adjusting the position. Not all controllers support progress bar and it can even be media specific (streams can not be seeked usually).
Closing a Controller
You can close a controller by clicking its icon when the controller is selected. This will turn off any polling for that controller and close the application if the server side supports that. Starting the controller is simply done by selecting the controller which will also start the application if not already running.
The client application can be installed from Preware, just look for Home Control application.
To install the server application you need to have working installation of node.js and npm. Then you can use npm to install hc-server: npm install hc-server
Then you can run the server by entering the node_modules/hc-server directory and executing: node hc-server.js
This server software can be run on Linux / OS X / Window, see the supported features below. Version 0.6.x of node is recommended, although everything should work with the 0.4.x version as well.
You should make sure that the port that the hc-server uses (default: 3000) is not accessible from outside your local area network. If you want to make the server accessible outside of your local area network then you should configure the server to require user authentication.
You can edit the following default values by editing the config.js file.
- Authentication username and password (default: none)
- Port for HTTP connections (default: 3000)
- Port for SSD queries (default: 1900)
All currently supported controllers need the server address of the device/HC server. The form of the address is <address>:<port>, if username/password is needed then: <user>:<password>@<address>:<port>
For the controllers that need the Home Control server, the address is the IP address of the computer running the server application and the port is 3000. For the other controllers that control the devices/applications directly you need to see the device/application configuration for the username/password and address/port configuration. Below you can find some additional information and default settings for some of the devices/applications.
Boxee / XBMC
See the Boxee/XBMC configuration for the address/port setup. The default port is 8080.
To enable the controlling in VLC select 'Add Interface' from the menus and select 'Web Interface'. Then you can configure the controller in Home Control by using the IP address of the computer running the VLC and default port 8080.
Or you can just start VLC from command line with following parameters: vlc --extraintf=luaintf --lua-intf=http
To get all features you need to have dbus-send command line application installed. It comes pre-installed with many distributions.
To get all features you need to have dbus-send command line application installed. It comes pre-installed with many distributions. You also need to enable dbus-service plugin in Totem.
Mouse control in OS X
This will most likely require some too, but this is not implemented yet...
Mouse / Keyboard control in Windows
You might get mouse / keyboard control working already by installing XMing or Cygwin/X for Windows. I haven't tested this method though. Proper support coming in future releases.
I get Error: bind EADDRINUSE
Then the default ports that HC server uses are reserved by some other service and you need to try different ports. You can set the ports with command line parameters: -p <http_port> <ssd_port>
Inaccurate Rhythmbox status
If the status in Home Control is not showing correct status after you change the playback state from the Rhythmbox then you most likely don't have dbus-send command installed in your system. It is needed for Home Control server to get the playback status from Rhythmbox.
Limited controls for Totem
If the status and controls in Home Control for Totem are limited (i.e. no current video info for example) then you most likely don't have dbus-send installed or you don't have dbus service plugin enabled/installed in Totem. Those are required for better control of Totem.
You should also donate to Donald Kirker for his awesome work on the UPNP support which is coming soon! To donate to him click the button below:
Official Developer Project Page
Official Twitter Account
- Follow Home Control on Twitter: @therealsconix
- 0.8.1 - Current Public Release - (Dec. 20rd, 2011)
- Fixed small bug in manual adding of servers
- 0.8.0 - First Public Release - (Dec. 20rd, 2011)
- First public release
- Extend the already supported modules with full playlist control / search etc.
- Winamp module for Music Player extension (will be the first test module for Windows)
- Window Media Player control if possible
- Windows mouse and keyboard support
- Windows sound/volume controller
- OS X mouse control
- IP / Web Camera support for surveillance / monitoring with motion detection
- Support for IR controlled devices
- UPNP module for controlling UPNP devices
- You have something else on your mind, then please let me know :)